Fuel Manager Separator kit for: Volkswagen Amarok Diesel This filter unit is to be used as a Pre-Filter to separate water & contaminates thus avoiding costly repairs due to poor fuel quality.
This kit comes complete with very specific fitting instructions and mounting bracket so all of the hard work is done !
Kit FM603DPK Includes: Fuel Manager 30 micron Filtration Unit Mounting Bolts, Washers and Nyloc Nuts Spare 30 Micron Replacement Filter 4m 3/8 Inch Quality Fuel Hose Direction Plus Filter Bracket Blanking Plugs 2x Straight tail fittings Hose Clamps Thread Paste Sealant (6ml Tube) 3x 6mm Bolt 2x 6mm Washer 13mm 1x 6mm Washer 25mm 2x 6mm Washer small 2x 6mm Nyloc nuts 1x 6mm spring washer 1x 8mm Bolt, Washer & Nut 1x Quick Fit male and matching 1x Quick Fit female
NOTE: This rear hole has two variations; it can have a thread to take a 6mm bolt, or sometimes the hole has no thread, but is a hexagon shaped hole. In which case you would use an 8mm bolt with a nut. The Amarok fuel supply system cannot be primed or bled in the usual manner. VW dealers use a scan tool to activate the tank mounted electric supply pump when changing a filter. Consequently you need to pre fill the Fuel Manager filter at the time of installation. For this you will need about 400ml of diesel in a clean container or bottle.
Install all fittings and plugs with the thread paste.
With Australia Post Eparcel or an interparcel courier, All items have tracking numbers (registered post) We offer Australia-wide delivery for all our products. All products are usually dispatched within 24 hours and should arrive within 2 – 6 business days.
WE ARE A WHOLESALER- WE DO NOT OFFER PICK UP DURING THE WEEK. IF YOUR GOODS HAVE ARRIVED YOU CAN PICK UP SATURDAYS 8-12PM
WE TYPICALLY SEND ITEMS DIRECT FROM MANUFACTURE TO YOUR ADDRESS, IF YOU WISH TO COLLECT FROM STORE YOU MUST DIRECTLY ARRANGE A PICK UP ONCE YOU HAVE CONFIRMED ITEMS INSTOCK
Items must be returned within 7 days for staff inspection.
Items will only be replaced if not working, not refunded.