Universal Fuel Manager Pre Filter Separator Kit Diesel 200HP/30micron
Filters down to 30 Micron, excellent to use as a Pre Filter on any Modern Diesel Engine up to 220 HP. This Filter unit is to be used as a Pre Filter to separate water & contaminates thus avoiding costly repairs due to poor fuel quality.
Kit FM708DPK Includes : Fuel Water Separator unit with Plastic bowl and integrated drain tap. 2x Brass Fitting 1/4 (6.35mm) NPT Thread, 1/2" (12.7mm) Tail 2x Blocks for universal fitting options (There are 4 Ports in the head.) 1x Metre 1/2" (12.7mm) Fuel Line 4x Hose Clamps 2x Nuts & Bolts and washers for mounting Thread Paste Sealant (6ml Tube)
We also have available to suit this unit a 12 Volt water sensor kit with wiring harness and dash light to advise when you have water in the bowl. (See separate listing !)
Install all fittings and plugs with the thread paste.
DELIVERY
With Australia Post Eparcel or an interparcel courier, All items have tracking numbers (registered post) We offer Australia-wide delivery for all our products. All products are usually dispatched within 24 hours and should arrive within 2 – 6 business days.
PICKUP
WE ARE A WHOLESALER- WE DO NOT OFFER PICK UP DURING THE WEEK. IF YOUR GOODS HAVE ARRIVED YOU CAN PICK UP SATURDAYS 8-12PM
WE TYPICALLY SEND ITEMS DIRECT FROM MANUFACTURE TO YOUR ADDRESS, IF YOU WISH TO COLLECT FROM STORE YOU MUST DIRECTLY ARRANGE A PICK UP ONCE YOU HAVE CONFIRMED ITEMS INSTOCK
WARRANTY PROTECTION:
Items must be returned within 7 days for staff inspection.
Items will only be replaced if not working, not refunded.
